Unicog Wiki | Main / DefaultSettingOfMEGEquipment

Videoprojector:

• Set as primary display device

• Refresh rate set at 60 Hz

• Resolution set at 1400 x 1050

• In the parameters setting:

menu Position/Size: "Through" (your image size will be adapted to its input resolution)

menu Picture:

	* Picture mode: Manual
	* Contrast set to 30
	* Bright set to 0
	* Color set to 40
	* Tint set to 30
	* Color temp set to "user1"
	* Gamma set to "default"

Monitor of stimulation computer:

• Set as secondary display device

• Refresh rate set at 60 Hz

• Resolution set at 1400 x 1050

Audio amplifier:

• Source set to CD

• Sound intensity set to 45

• Loudspeakers and audio amplifier are both connected to stimulation computer (via a splitter)

Other:

• EOG/ECG/EEG reference electrodes cleaned, dried and separately wrapped

• EEG caps cleaned and set to dry

• HPI coils without tape, and wrapped

• Isotrak googles and pen correctly arranged

• Earphones removed from tubes (inside the MSR)

• MEG helmet correctly cleaned and disinfected

• MSR door correctly closed